JUICE LUBES TUBELESS SELF-ADHESIVE TAPE 10 METER ROLL (various sizes)
Description
Let us take you one step closer to becoming airtight. Designed specifically to make tubeless setup a breeze, our tape is primed with the finest pressure sensitive adhesive and constructed from high tensile strength dual-layered film.
With its optimum amount of stretch and rigid recyclable core the tape can be pulled and applied with tension, it'll also contour perfectly to the shape of your rim making it a doddle to install. If that wasn't enough, we've also included a handful of finishing strips to ensure that perfect airtight seal.
Our unique adhesive holds fast and won't leave any sticky gunky residue should you need to remove the tape at a later date.
Product Info
- High strength dual-layered film
- Bespoke pressure sensitive adhesive
- Optimum amount of stretch
- Finishing strips for perfect airtight seal
- Leaves no mess when removed
- 10M roll allows 4 applications or 5 for 26"
Step By Step
STEP 1
Get Set.
Start with a clean dry rim, our Ultimate Workshop Degreaser will remove any grease or old adhesive. Use an old rag or microfibre cloth to wipe it away.
Be sure to select the right size rim tape for your chosen setup.
STEP 2
Tape It.
Start applying the tape 2 spoke holes back from the valve hole. Press the tape down firmly into the centre of the rim as you go and smooth it out towards the edges, removing any trapped air as you go. Take it steady.
Run the tape around the entire rim whilst keeping tension and working air from beneath the tape as you go. Finish 2 spoke holes past the valve hole. Cut the tape at 45 degrees for a cleaner finish.
STEP 3
Check and Seal.
Check for any trapped air under the tape, push any bubbles out towards a spoke hole.
Cover the end of the fitted tape with one of the finishing strips provided. This will help prevent any peel back.
Use a small spike to pierce a hole in the tape over the valve hole.
Fit our fancy valves. Whack a trye on. Add some Juice Lubes Tyre Sealant and give 'er some wind.
All bikes and accessories on our website are available for purchase through your Employers Bike to Work Scheme.
You can save between 32% and 52% by buying your bike through the scheme.
WHAT DO YOU NEED TO DO?
Add the bike/accessories to your shopping cart.
At the payment page choose “Pay later with Bike To Work”.
This will reserve the bike for you, free of charge, and you will receive a quotation for your selection by email.
You can then use the quote details to complete your application on your employers Bike To Work or TravelHub portal.
We always advise customers to use the Bike To Work Scheme for bike and accessory payments, to save up to 52%. However, if your bike package is above €1250 for standard bikes or above €1500 for Ebikes, Cycle Solutions, can offer you split payments on the balance through Klarna. This means you get the full benefit of the Bike To Work Scheme and also 4 interest free monthly payments to spread the remaining cost. If you cannot apply using the Bike To Work Scheme you can use Klarna for the full value of the bike and accessories and pay over 4 months, interest free. Contact us on sales@cycleways.com for more information.
